固定翼无人机曲线路径跟踪的积分向量场方法

常规的向量场方法在处理无人机曲线路径跟踪问题时很容易受非定常风扰的影响而使得跟踪误差增加,因此很多方法采用用无人机的惯性坐标系(地速和方位角)替代机体坐标系(空速和偏航角)的方式来提高抗风性能。但是,这种方式只能处理大小和方向均恒定的风扰,这在实际飞行中是过于理想的假设。为了克服这些不足,提出了一种采用侧偏距的积分来主动抵消非定常风扰的积分向量场方法用于固定翼无人机曲线路径跟踪控制。根据期望路径的曲率及路径角,结合无人机自身的状态信息设计了曲线路径跟踪策略,并且使用李雅普诺夫理论证明了提出的方法能够确保闭环系统的全局渐进稳定。最后,使用高性能半实物仿真系统验证了提出方法的抗风跟踪性能。     

遥控武器站的自抗扰控制

遥控武器站系统是一个具有强后坐力、变摩擦力和变转动惯量的非线性系统,采用自抗扰控制技术对该系统进行稳定控制.系统利用自抗扰控制器的扩张状态观测器,对系统未建模特性和不确定性外扰进行动态估计和反馈补偿,提高了系统的抗干扰能力.实物系统稳定控制实验结果表明,所设计的自抗扰控制器具有良好的动态品质和较强的抗干扰性能,系统实现...     

基于DEA模型的部队编制方案评价

建立了评价优选部队编制方案的数据包络分析(DEA)模型,该模型测算了各备选编制方案的总体效率、技术效率、规模效率等状况,对非DEA有效的编制方案提出了使其达到DEA有效的途径,给出了各备选编制方案的初排序.在此基础上,通过比较各有效备选编制方案平均横切效率的大小,得到所有备选编制方案的终排序.并就部队编制方案制定.提出了若干建议供决策部门参考.     

超燃冲压发动机燃烧室燃料喷注及其内流场的数值模拟

基于三维N-S方程,利用有限差分数值离散方法,对考虑了燃料喷注和凹腔结构综合影响的某超燃冲压发动机燃烧室模型的内流场进行了数值模拟,与实验流动图谱进行了定性比较,并进一步探讨了燃料喷注过程的非定常特性以及凹腔结构对流动的影响。研究表明:本文数值模拟的稳态时刻流场与实验流动图谱相似;数值结果捕捉到了横向喷注燃料沿下游运动并向凹腔扩散的非定常动态变化的规律。     

助推器分离过程动态流场数值模拟

利用三维N-S方程,采用NND2M有限差分格式作为数值离散方法,对助推器与上面级分离过程的动态流场进行了数值模拟,分析了反作用推力火箭发动机的喷流对上面级弹体底部轴向作用力的影响。根据计算得到的变化规律发现,在分离距离较小的情况下,反推火箭喷流对上面级弹体的干扰作用明显,产生较大轴向作用力,对于上面级飞行稳定性有影响。     

复合材料层合圆柱壳的动力响应与层间应力

采用分层壳理论和厚度方向的二次插值函数推导出正交铺设层合圆柱壳的动力响应方程,并得出简支层合圆柱壳自由振动问题的解.对于给定算例,计算出的自振频率与三维分析的结果吻合良好,说明所推导的二维解具有足够精度.计算了前四阶模态对应的壳中应力.计算结果说明,对于高阶模态,层间应力相对于面内应力的比值远高于低阶模态的对应比值,高的层间正应力是高阶模态导致脱层破坏的主要原因.     

天波超视距雷达评述

天波超视距雷达以其独特的工作方式使它在抗低空突防、抗隐身、抗反辐射导弹（ＡＲＭ）、抗电子干扰这“四抗”性能上有天然的优势。与其它雷达相比,效费比极高。其分布式结构也使它的抗毁性很强,但它极受环境因素制约。就该雷达的工作原理和特点、设计上要考虑的环境因素、性能、开发试验和部署及应用前景进行了讨论。     

Real-time calculation of fragment velocity for cylindrical warheads

To simulate explosion fragments, it is necessary to predict many variables such as fragment velocity, size distribution and projection angle. For active protection systems these predictions need to be made very quickly, before the weapon hits the target. Fast predictions also need to be made in real time simulations when the impact of many different computer models need to be assessed. The research presented in this paper focuses on creating a fast and accurate estimate of one of these variables - the initial fragment velocity. The Gurney equation was the first equation to calculate initial fragment velocity. This equation, sometimes with modifications, is still used today where finite element analysis or complex mathematical approaches are considered too computationally expensive. This paper enhances and improves Breech’s two-dimensional Gurney equation using available empirical data and the principals of conservation of momentum and energy. The results are computationally quick, providing improved accuracy for estimating initial fragment velocity. This will allow the developed model to be available for real-time simulation and fast computation, with improved accuracy when compared to existing approaches.     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

基于"姿态矩阵"量测的机载导弹传递对准技术

"速度+姿态"量测匹配方案是目前比较理想的机载导弹传递对准技术.采用"姿态"量测时存在矩阵计算量大等缺点,在具体工程应用时更会受到计算机速度的限制,尤其是需要快速进行卡尔曼滤波计算时.引入了一种与"姿态"量测具有相同特点的"姿态矩阵"量测方案,设计了快速对准卡尔曼滤波器,并进行了仿真分析.结果表明是一种具有工程意义的实用快速传递对准技术.